Accessories
View our Pressure Sewer accessories to connect up your Pressure Sewer system and ensure its optimum performance.
Ecoflow is a one-stop-shop for all sewer system accessories
Boundary Kits
Provide a connection point for each individual house. These are especially useful for greenfield development as they eliminate the requirement for live tapings. Ecoflow’s boundary kits come with polyethylene stubs pre-welded and pressure-tested to 16Bar. Boundary kit valves from Ecoflow are factory tested and individually serialised for traceability.
Flushing Points
Provide an access point to the network for flushing or sucking if the downstream network is isolated. Ecoflow’s Flushing point is pre-assembled, and pressure tested to 16Bar.
E/One Extender
Quick and easy in-field adjustments of E/One tanks. This 150mm riser ensures that the tank cover is above the finished grade. This provides sufficient venting for the tank and prevent surface water from infiltrating into the tank. The Extender can also be used to gain a bit more depth for that tricky lateral. It’s best practice to only use one Extender to ensure service technicians can still accesses the discharge valve.
Air Valve Kits
Typically, we try to design air valves out of the network. However, in some applications they are necessary at high points. It is critical to select an air valve that can operate at very low-pressure fluctuation. Ecoflow’s combination air release/vacuum valve pit will ensure air is expelled or drawn in where required to ensure the network operates efficiently.
Isolation Valves
Enables branches of the pressure sewer network to be isolated for maintenance or for new connections. Ecoflow holds a range of resilient seated isolation valves for varying pipe diameters.
Pipe
Ecoflow recommend Polyethylene PE100 SDR11 PN16 pipe. Ecoflow typically have stock of 40mm - commonly used for connecting grinder pump stations to the rising main.
Fittings
PN16-rated fittings for tank and boundary kit connection.